真空上料机Vacuum feeder

◆性能特点 Performance characteristics

设备易装卸，清洗，可轮流用于多台设备

The equipment is easy to load, unload and clean, andcan be used for multiple equipment in turn

符合GMP标准，满足CIP要求

Comply with GMP standards and CIP requirements

无尘操作Dust free operation

设备便于维修，运行费用极低

The equipment is easy to maintain and the operationcost is very low

◆工作原理Working Principle

当压缩空气供给真空发生器时，真空发生器就产生负压形成真空气流，物料被吸入吸料咀，形成物气流，经过吸料管到达上料机的料仓内。过滤器把物料与空气彻底分离，当物料装满料仓时，控制器会自动切断气源，真空发生器停止工

作。同时料仓门自动开启，物料落到设备的料斗中。与此同时，压缩空气通过脉冲反吹自动清洗过滤器。等时间到或料位传感器发出上料信号时，自动启动上料机。

Working principle: when compressed air is supplied to the vacuum generator, the vacuum generator generates negative pressure to form vacuum air flow. The mate-

rial is sucked into the suction nozzle to form mate-rial air flow, which reaches the silo of the feeder through the suction pipe. The filter completely sepa-rates the material from the air. When the material isfilled with the silo, the controller will automati-

cally cut off the air source and the vacuum generatorwill stop working. At the same time, the silo door opens automatically and the materials fall into the hopper of the equipment. At the same time, the com-pressed air automatically cleans the filter through pulse back blowing. When the time is up or the mate-rial level sensor sends the feeding signal, the feed-ing machine will be started automatically.